3 Engineering Tips from Someone With Experience

5 Best Practices for Efficient Vacuum Excavation In digging, numerous ways of excavation are used. Though most of the methods used today are modern, others are traditional. These new methods used by drilling companies have made digging easier, faster and safer. An example is the vacuum excavation method that uses either water or air in the process. The following tips and practices are helpful in ensuring successful excavation. Some soils are usually hard-packed and heavy, and in such cases, air cannot be used efficiently in vacuuming. In situations like that, the use of water, or hydro excavation is the best alternative. In contrast, where the soil might be loose, sandy and with a lot of gravel, dry or air excavation is advised. Hydro excavation uses water pressure that damages old pipes and electric wires that are brittle, thus dry excavation is deemed as the safer choice. With regard to the size of the vacuuming pumps to be used, it is important to take into account the sizes of the trucks to be used in the excavation. If the required vacuum power is to be sufficient enough, then the size of the air or water tank must match the size of the pump used. If the intended outcome is massive vacuum power, then it is required that the tanks for holding air or water, and the pump be big enough. Where there is going to be excavation using both wet and dry methods of excavation, then you are going to need above average tanks. While vacuuming- whether wet or dry- is generally a safer method than older traditional digging methods, proper safety considerations should be observed while digging. Proper training on how to handle and operate machines safely should be introduced. Special training for the people going to operate the machines should first take place before they start. Professional training of the workers who are going to work the machines should take place. Workers should be knowledgeable on how to avoid damaging underground utility pipes and power lines. Workers should be given appropriate gear and attire. Hand gloves and dielectric boots are part of the gear needed. Precision is gotten from using the vacuuming method to dig. Sometimes things do not always go right in the excavation process. This can be caused by mistakenly digging in the wrong site due to wrong identification process or human error. Mistakes of this kind may lead to explosions from gas leaks and electrocutions. By reaching out to the concerned authorities, it will help in ensuring you are digging at the correct site and you will also be given maps. Proper maintenance of the vacuum trucks and the pumps used by the drilling company must be observed. This makes sure the machines perform according to their maximum ability. Though wear and tear is unavoidable in this situation, machines should often be monitored to be on the safe side. Regular oiling of the machines, especially the moving parts is vital. Check out all the parts like hoses, nozzles among others. Following these best practices will help ensure efficient vacuum excavation.

The Art of Mastering Experts

Short Course on Services – What You Need To Know